IDEALLIFT

Our latest development allowed us to extend our product range once again. This new platform lifts for the private sector combines the characteristicts that are already well-known from our service and goods lifts range:

The modular system of our service lifts including the auxiliary structure allows a flexible adjustement to existing site conditions and it reduces the installation time to a minimum. We combine stylish design with highest quality and reliability as you can expect from a German-engineerd and manufactured lift.

The innovative belt drive allows us to reduce the headroom and pit depth to mimimum dimensions and ensures a silent and smooth running.

The IDEALLIFT is test-type certified and constructed based on the current machinery directive 2006/42/EC together with the harmonized standard EN 81-41.

Please find below some information about our IDEALLIFT:

  • Capacity 250 - 385 kg
  • Travel up to 12 m
  • Single hinged or telescopic sliding landing doors
  • Motor position at the top
  • Nominal speed 0,15 m/s
  • Pit depth min. 100 – 150 mm
  • Headroom min. 2500 mm – 2700 mm

Car sizes:

  • Width: 650 - 1100 mm
  • Depth: 1050 - 1400 mm
  • Height: 2000 mm

Basic features:

Hinged door version:

  • Landing doors with Zintec steel and large glazed vision panel “Panorama“
  • Continuous load guards between landing doors
  • Car operating station with constant pressure buttons

Hinged door version with foldable car doors:

  • Landing doors with Zintec steel and large glazed vision panel “Panorama“
  • Continuous load guards between landing doors
  • Car operating station with press-to-run control

Telescopic sliding doors version:

  • Telescopic doors with Zintec steel
  • Car operating station with press-to-run control
  • Multi-indicator with emergency call pictograms and overload indicator

All versions:

  • Car with Zintec steel for individual colour design by the customer.
  • Car floor prepared for flooring by the customer (thickness max. 5mm)
  • Galvanized structure for the installation in a supporting shaft. Quick and easy installation with pre-assembled components
  • VVVF controlled traction drive unit with belts as suspension
  • PLC control unit, completely pre-wired, low voltage engineering
  • Single phase mains supply 1x230V/N/PE/50-60Hz
  • LED car lighting with emergency lighting
  • LED shaft lighting
  • Car entrance protection: light curtain
  • Preparation for autodialler by the customer
  • Overload device

Optionally:

  • Self-supporting Zintec steel structure
  • Structure prepared for glass panels by the customer
  • Zintec surfaces powder coated in standard RAL colour
  • Landing doors fire-rated acc. EN 81-58: E120, EW60, EI90 or DIN 18090
  • Hold-open device for landing door including door release/close button inside the car
  • Different materials and designs acc. to customer‘s requirements
  • Water/dust ingress protection (IP)
  • Other tailor made solutions on request